Articles:

Doing so could damage your machine.

You can use Dyson’s red quick-release button to remove the wand (or any attached tools)..Step 2: Remove The Old Battery.

Three screws need to be removed before you can take out the V11’s battery.Here’s where to find them:.The first is on the rear of the vacuum body (almost directly behind the red trigger)..

The other two screws are located on the bottom of the battery.You’ll need to tilt the vacuum onto its side to access them.. It’s worth noting that the bottom screws are meant to be at an angle.

Keep this in mind when removing and replacing the screws.. Be very careful to use the right screwdriver when removing the battery.

Using the wrong screwdriver risks stripping the screw heads, which makes the battery very difficult to remove without specialist tools.If you don’t know what you’re working with, run your finger along the surface of the floor.

If you see a mark, it probably has an oil, lacquer, or varnish finish.If not, assume it’s a sealed surface.. 2.

Use Doormats and Remove Shoes.Adding doormats and leaving shoes at the door is vital for protecting hardwood floors..